Rumoi Line (JR Hokkaido)
Introducing
The Rumoi Line is a 14.4 km long JR Hokkaido line connecting Fukagawa Station in Fukagawa City, Hokkaido to Ishikari-Numata Station in Numata Town, Uryu County, Hokkaido.
The line used to run 66.8 km to Mashike Station in Mashike-cho, Mashike-gun, Hokkaido, but the Rumoi - Mashike line was discontinued in December 2016, followed by the Ishikari-Numata - Rumoi line in April 2023, leaving only Fukagawa - Ishikari-Numata as the only remaining line.
In the past, the Rumoi Line was serviced by the express train "Mashike," which runs directly from Sapporo Station, the express train "Rumoi," which runs directly from Asahikawa Station, and the "SL Suzuran" steam locomotive, a C11 class steam locomotive. As of March 2024, only seven regular trains per day operate on the in-bound line and out-bound lines.
Departing from Fukagawa Station, the train heads north through the Ishikari Plain, crossing the Ebishima Pass with its series of large curves and gradients on its way to Rumoi Station. Along the way, you will be able to experience Hokkaido's unique character in many places, such as Kita-Chippubetsu Station with its wooden platform and Ebishima Station adjacent to the station building where the TV drama "Suzuran" was set.
This DLC includes the in-bound line and out-bound lines between Fukagawa and Rumoi, including the discontinued section. We have decided to create this DLC not only as a driving experience, but also to preserve the scenery and memories of the discontinued section in the form of a simulator. We hope you will enjoy driving a line that you will never ride again with this DLC.
Key data
- Line Length: 50.1 km
- Number of stations: 12
- Safety system: ATS-Dn / ATS-Sn
- Train model: KiHa 54
serieseries (1 car) - Max speed: 85 km/h
- Max speed after signals:
- Reduced speed (green/yellow): 65 km/h
- Caution (yellow): 45 km/h
- Speed restriction (yellow/yellow): 25 km/h
- Routes:
- Rumoi ~ Fukagawa (4920D) : "Local" type - 9 stations - 50.1 km
- Rumoi ~ Asahikawa (4922D) : "Local" type - 12 stations - 50.1 km (can't go above Fukagawa)
- Rumoi ~ Fukagawa (4924D) : "Local" type - 10 stations - 50.1 km
- Rumoi ~ Fukagawa (4926D) : "Local" type - 10 stations - 50.1 km
- Fukagawa ~ Rumoi (回5921D) : "Not in service" type - 2 stations - 50.1 km (direct train)
- Fukagawa ~ Rumoi (4921D) : "Local" type - 5 stations - 50.1 km
- Fukagawa ~ Rumoi (4923D) : "Local" type - 10 stations - 50.1 km
- Fukagawa ~ Rumoi (4925D) : "Local" type - 11 stations - 50.1 km
- Fukagawa ~ Rumoi (4929D) : "Local" type - 10 stations - 50.1 km
- In-train announcements : Yes
- Driver announcement (pointing-and-calling) : Yes
Console details
Features
This line can be run in both directions. The timetable is displayed directly in the cab.
OnWhen theheading left,towards Rumoi, about 1.8km before reaching Mappu station, you can see a fox crossing the safety radio equipment.track.
In the center are several components. At the top is the ATS-Dn gauge, which operates in much the same way as the ATS-Ps. This is only used whenat departingthe fromexit/entry or arriving atto Fukagawa station.
Then there are various indicators:
耐雪ブレーキ: Snow resistant brakes
Then there are 3 dials: the speed dial, the ER (Equalizing reservoir - black needle) / MR (Main reservoir - red needle) pressure dial and the BP (Brake pipe - black needle) / BC (Brake cylinder - red needle) pressure dial.
Finally, on the right, you can see the timetable for the chosen route. This is the first line offering direct integration of the timetable into the game.Sn.
SpecialStations driving featureslist
The
2 modes are available in the simulator parameters (System tab):
Air brake
Braking is via pneumatic brakes, with a dedicated 4-position handle. Braking power is managed via the right-hand dial and its 2 needles: the red BC needle and the black BP needle. The 4 positions are :
The braking procedure is described in the
Please note that when the brake handle is set to "Service", there will come a time when the BP pressure may drop, but the BC pressure will not. What's more, if the BP pressure drops too low, it will take longer to release the brakes. It is recommended not to drop below 300 kPa for BP pressure.
Gear shift
This defines the transmission mode between the engine and the wheels. It has 3 positions:
The position is changed via the [R] (to "Direct transmission") and [F] (to "Gear change") keys.
Note that the Kiha 54 automatically manages transmission shifting according to speed, so you just need to be on "Gear shift" or "Direct transmission" before accelerating.
Engine brake (speed limitation)
To use the motor brake (e.g. on steep descents), set the main handle to P1, then press the speed-limiting button [D], and return the main handle to the neutral position.
To deactivate, simply set the main handle to P1 or higher.
Movie
Useful links
Wikipedia: https://en.wikipedia.org/wiki/Rumoi_Main_Line
Driver's guide:
Timetables (in japanese):
